Live pricing is currently disrupted, to ensure accurate contract pricing, please refresh this page or try again later.

WLCALSMOOTH34018EP

340 1/8 ALUM ELECTRODE 1 LB

Item Code: WLCALSMOOTH34018EP

Aluminum Smooth 340 Maintenance And Repair Electrodes Feature A Precise Combination Of Core Wire And Coating, Providing High Speed Deposition Of Dense, Machinable Welds. It Is Recommended For Fabrication And Repair Of Cast And Wrought Aluminum. It Is Excellent For Foundry Defects, Machining Errors And All Types Of Salvage Work. Coated Stick For Fabrication, Maintenance Of Repairs Of Cast Or Wrought Aluminum Base Metals. It Is Widely Used On Sheets, Tubes And Extrusions In Thickness Of 1/8" Or More. Smooth 340 Is Also Well-Suited To Torch Applications Such As Aluminum Motor Blocks And Cylinder Heads, Machine Bases And Supports, Housings And Mounts. Procedure: Use Dc Reverse Polarity. Weld Areas Should Be Clean And Heavier Sections Should Be Beveled. Best Results Will Be Obtained On Heavier Sections When Preheated To 500 Degrees Fahrenheit. The Electrode Should Be Held In A Vertical Postion. Slag Needs To Be Removed Before Multiple Passses. Clean With Hot Water; Add 10% Sulfuric Acid To Water If Additional Cleaning Is Required.

Category Aluminum

Description

Aluminum Smooth 340 Maintenance And Repair Electrodes Feature A Precise Combination Of Core Wire And Coating, Providing High Speed Deposition Of Dense, Machinable Welds. It Is Recommended For Fabrication And Repair Of Cast And Wrought Aluminum. It Is Excellent For Foundry Defects, Machining Errors And All Types Of Salvage Work. Coated Stick For Fabrication, Maintenance Of Repairs Of Cast Or Wrought Aluminum Base Metals. It Is Widely Used On Sheets, Tubes And Extrusions In Thickness Of 1/8" Or More. Smooth 340 Is Also Well-Suited To Torch Applications Such As Aluminum Motor Blocks And Cylinder Heads, Machine Bases And Supports, Housings And Mounts. Procedure: Use Dc Reverse Polarity. Weld Areas Should Be Clean And Heavier Sections Should Be Beveled. Best Results Will Be Obtained On Heavier Sections When Preheated To 500 Degrees Fahrenheit. The Electrode Should Be Held In A Vertical Postion. Slag Needs To Be Removed Before Multiple Passses. Clean With Hot Water; Add 10% Sulfuric Acid To Water If Additional Cleaning Is Required.

340 1/8 ALUM ELECTRODE 1 LB

Item Code: WLCALSMOOTH34018EP

Aluminum Smooth 340 Maintenance And Repair Electrodes Feature A Precise Combination Of Core Wire And Coating, Providing High Speed Deposition Of Dense, Machinable Welds. It Is Recommended For Fabrication And Repair Of Cast And Wrought Aluminum. It Is Excellent For Foundry Defects, Machining Errors And All Types Of Salvage Work. Coated Stick For Fabrication, Maintenance Of Repairs Of Cast Or Wrought Aluminum Base Metals. It Is Widely Used On Sheets, Tubes And Extrusions In Thickness Of 1/8" Or More. Smooth 340 Is Also Well-Suited To Torch Applications Such As Aluminum Motor Blocks And Cylinder Heads, Machine Bases And Supports, Housings And Mounts. Procedure: Use Dc Reverse Polarity. Weld Areas Should Be Clean And Heavier Sections Should Be Beveled. Best Results Will Be Obtained On Heavier Sections When Preheated To 500 Degrees Fahrenheit. The Electrode Should Be Held In A Vertical Postion. Slag Needs To Be Removed Before Multiple Passses. Clean With Hot Water; Add 10% Sulfuric Acid To Water If Additional Cleaning Is Required.

Category Aluminum

Description

Aluminum Smooth 340 Maintenance And Repair Electrodes Feature A Precise Combination Of Core Wire And Coating, Providing High Speed Deposition Of Dense, Machinable Welds. It Is Recommended For Fabrication And Repair Of Cast And Wrought Aluminum. It Is Excellent For Foundry Defects, Machining Errors And All Types Of Salvage Work. Coated Stick For Fabrication, Maintenance Of Repairs Of Cast Or Wrought Aluminum Base Metals. It Is Widely Used On Sheets, Tubes And Extrusions In Thickness Of 1/8" Or More. Smooth 340 Is Also Well-Suited To Torch Applications Such As Aluminum Motor Blocks And Cylinder Heads, Machine Bases And Supports, Housings And Mounts. Procedure: Use Dc Reverse Polarity. Weld Areas Should Be Clean And Heavier Sections Should Be Beveled. Best Results Will Be Obtained On Heavier Sections When Preheated To 500 Degrees Fahrenheit. The Electrode Should Be Held In A Vertical Postion. Slag Needs To Be Removed Before Multiple Passses. Clean With Hot Water; Add 10% Sulfuric Acid To Water If Additional Cleaning Is Required.

selection not available, try a different combination

selection not available, try a different combination

- +

selection not available, try a different combination

selection not available, try a different combination

Add to quick list

Compare

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

Address

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

{{ product.display_uom_price }} / {{ product.display_uom }}

- +

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

{{product.item_pack_uom}}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

{{selectproduct.item_pack_uom}}

Call for price

- +

javascript:;